Consoles: U-Boot console  
Compatible U-Boot API signature found @0x3af5d988

FreeBSD/armv7 U-Boot loader, Revision 1.2
(Wed Jan 17 19:59:14 PST 2018 bob@www.zefox.com)

DRAM: 948MB
Number of U-Boot devices: 2
U-Boot env: loaderdev not set, will probe all devices.
Found U-Boot device: disk
  Probing all disk devices...
  Checking unit=0 slice=<auto> partition=<auto>...
  Checking unit=1 slice=<auto> partition=<auto>... good.
Booting from disk1s2a:
/boot/kernel/kernel data=0x75b15c+0x1dcea4 syms=[0x4+0x80d30+0x4+0xba8f3]

Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...               
/boot/dtb/bcm2836-rpi-2-b.dtb size=0x34cd
Loaded DTB from file 'bcm2836-rpi-2-b.dtb'.
Kernel entry at 0x1200100...
Kernel args: (null)
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-CURRENT #0 r329412: Tue Feb 20 23:19:49 PST 2018
    bob@www.zefox.com:/usr/obj/usr/src/arm.armv7/sys/ZEFOX arm
FreeBSD clang version 6.0.0 (branches/release_60 325330) (based on LLVM 6.0.0)
WARNING: WITNESS option enabled, expect reduced performance.
VT: init without driver.
CPU: ARM Cortex-A7 r0p5 (ECO: 0x00000000)
CPU Features: 
  Multiprocessing, Thumb2, Security, Virtualization, Generic Timer, VMSAv7,
  PXN, LPAE, Coherent Walk
Optional instructions: 
  SDIV/UDIV, UMULL, SMULL, SIMD(ext)
LoUU:2 LoC:3 LoUIS:2 
Cache level 1:
 32KB/64B 4-way data cache WB Read-Alloc Write-Alloc
 32KB/32B 2-way instruction cache Read-Alloc
Cache level 2:
 512KB/64B 8-way unified cache WB Read-Alloc Write-Alloc
real memory  = 994045952 (947 MB)
avail memory = 825110528 (786 MB)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
arc4random: no preloaded entropy cache
random: entropy device external interface
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> mem 0x3f000000-0x3fffffff on ofwbus0
local_intc0: <BCM2836 Interrupt Controller> mem 0x40000000-0x400000ff on simplebus0
intc0: <BCM2835 Interrupt Controller> mem 0xb200-0xb3ff irq 4 on simplebus0
generic_timer0: <ARMv7 Generic Timer> irq 0,1,2,3 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 19200000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 19200000 Hz quality 1000
bcmwd0: <BCM2708/2835 Watchdog> mem 0x10001c-0x100027 on simplebus0
gpio0: <BCM2708/2835 GPIO controller> mem 0x200000-0x2000af irq 5,6,7,8 on simplebus0
gpio0: read-only pins: 46,48-53.
gpio0: reserved pins: 48-53.
gpiobus0: <OFW GPIO bus> on gpio0
gpioc0: <GPIO controller> on gpio0
bcmrng0: <Broadcom BCM2835 RNG> mem 0x104000-0x10401f irq 9 on simplebus0
iichb0: <BCM2708/2835 BSC controller> mem 0x205000-0x20501f irq 10 on simplebus0
iichb1: <BCM2708/2835 BSC controller> mem 0x804000-0x80401f irq 11 on simplebus0
spi0: <BCM2708/2835 SPI controller> mem 0x204000-0x20401f irq 12 on simplebus0
spibus0: <OFW SPI bus> on spi0
spigen0: <SPI Generic IO> at cs 0 mode 0 on spibus0
bcm_dma0: <BCM2835 DMA Controller> mem 0x7000-0x7fff,0xe05000-0xe05fff irq 13,14,15,16,17,18,19,20,21,22,23,24,25 on simplebus0
mbox0: <BCM2835 VideoCore Mailbox> mem 0xb880-0xb8bf irq 26 on simplebus0
sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x300000-0x3000ff irq 27 on simplebus0
mmc0: <MMC/SD bus> on sdhci_bcm0
uart0: <PrimeCell UART (PL011)> mem 0x201000-0x201fff irq 28 on simplebus0
uart0: console (115200,n,8,1)
vchiq0: <BCM2835 VCHIQ> mem 0xb800-0xb84f irq 29 on simplebus0
vchiq: local ver 8 (min 3), remote ver 8.
pcm0: <VCHIQ audio> on vchiq0
bcm283x_dwcotg0: <DWC OTG 2.0 integrated USB controller (bcm283x)> mem 0x980000-0x99ffff irq 30 on simplebus0
usbus0 on bcm283x_dwcotg0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
bcm2835_cpufreq0: <CPU Frequency Control> on cpu0
cpu1: <Open Firmware CPU> on cpulist0
cpu2: <Open Firmware CPU> on cpulist0
cpu3: <Open Firmware CPU> on cpulist0
fb0: <BCM2835 VT framebuffer driver> on ofwbus0
fbd0 on fb0
VT: initialize with new VT driver "fb".
fb0: 656x416(656x416@0,0) 24bpp
fb0: fbswap: 0, pitch 1968, base 0x3eb33000, screen_size 818688
gpioled0: <GPIO LEDs> on ofwbus0
cryptosoft0: <software crypto>
Timecounters tick every 1.000 msec
usbus0: 480Mbps High Speed USB v2.0
iicbus0: <OFW I2C bus> on iichb0
iic0: <I2C generic I/O> on iicbus0
iicbus1: <OFW I2C bus> on iichb1
iic1: <I2C generic I/O> on iicbus1
ugen0.1: <DWCOTG OTG Root HUB> at usbus0
uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
mmcsd0: 8GB <SDHC SL08G 8.0 SN 0FB4588D MFG 11/2014 by 3 SD> at mmc0 41.6MHz/4bit/65535-block
bcm2835_cpufreq0: ARM 600MHz, Core 250MHz, SDRAM 400MHz, Turbo OFF
uhub0: 1 port with 1 removable, self powered
ugen0.2: <vendor 0x0424 product 0x9514> at usbus0
uhub1 on uhub0
uhub1: <vendor 0x0424 product 0x9514, class 9/0, rev 2.00/2.00, addr 2> on usbus0
uhub1: MTT enabled
uhub1: 5 ports with 4 removable, self powered
ugen0.3: <vendor 0x0424 product 0xec00> at usbus0
smsc0 on uhub1
smsc0: <vendor 0x0424 product 0xec00, rev 2.00/2.00, addr 3> on usbus0
smsc0: chip 0xec00, rev. 0002
miibus0: <MII bus> on smsc0
smscphy0: <SMC LAN8700 10/100 interface> PHY 1 on miibus0
smscphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ue0: <USB Ethernet> on smsc0
ue0: Ethernet address: b8:27:eb:1a:5a:4b
ugen0.4: <SanDisk Extreme> at usbus0
umass0 on uhub1
umass0: <SanDisk Extreme, class 0/0, rev 2.10/0.10, addr 4> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0x0100
umass0:0:0: Attached to scbus0
ugen0.5: <vendor 0x067b product 0x2303> at usbus0
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: <SanDisk Extreme 0001> Removable Direct Access SPC-4 SCSI device
da0: Serial Number AA010509160727180727
da0: 40.000MB/s transfers
da0: 59836MB (122544516 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
Release APs
WARNING: WITNESS option enabled, expect reduced performance.
random: unblocking device.
arc4random: no preloaded entropy cache
Trying to mount root from ufs:/dev/ufs/rootfs [rw]...
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
WARNING: / was not properly dismounted
Warning: no time-of-day clock registered, system time will not be set accurately
Setting hostuuid: b4704544-5d40-11e7-b1f6-b827eb1a5a4b.
Setting hostid: 0x83642a11.
warning: total configured swap (524288 pages) exceeds maximum recommended amount (406120 pages).
warning: increase kern.maxswzone or reduce amount of swap.
Starting file system checks:
/dev/ufs/rootfs: 7637 files, 105792 used, 262487 free (6495 frags, 31999 blocks, 1.8% fragmentation)
/dev/da0d: UNREF FILE I=68  OWNER=root MODE=100600
/dev/da0d: SIZE=162 MTIME=Feb 23 13:16 2018  (CLEARED)
/dev/da0d: UNREF FILE I=71  OWNER=root MODE=100600
/dev/da0d: SIZE=1406 MTIME=Feb 23 13:27 2018  (CLEARED)
/dev/da0d: UNREF FILE I=75  OWNER=root MODE=100600
/dev/da0d: SIZE=164 MTIME=Feb 23 13:27 2018  (CLEARED)
/dev/da0d: UNREF FILE I=78  OWNER=root MODE=100600
/dev/da0d: SIZE=201 MTIME=Feb 23 13:30 2018  (CLEARED)
/dev/da0d: UNREF FILE I=79  OWNER=root MODE=100600
/dev/da0d: SIZE=191 MTIME=Feb 23 13:31 2018  (CLEARED)
/dev/da0d: UNREF FILE I=80  OWNER=root MODE=100600
/dev/da0d: SIZE=1016 MTIME=Feb 23 13:35 2018  (CLEARED)
/dev/da0d: UNREF FILE I=82  OWNER=root MODE=100600
/dev/da0d: SIZE=218 MTIME=Feb 23 13:31 2018  (CLEARED)
/dev/da0d: UNREF FILE I=84  OWNER=root MODE=100600
/dev/da0d: SIZE=1060 MTIME=Feb 23 13:31 2018  (CLEARED)
/dev/da0d: FREE BLK COUNT(S) WRONG IN SUPERBLK (SALVAGED)
/dev/da0d: SUMMARY INFORMATION BAD (SALVAGED)
/dev/da0d: BLK(S) MISSING IN BIT MAPS (SALVAGED)
/dev/da0d: 19639 files, 154978 used, 606269 free (141 frags, 75766 blocks, 0.0% fragmentation)
/dev/da0e: 744030 files, 3350512 used, 9704799 free (121175 frags, 1197953 blocks, 0.9% fragmentation)
/dev/da0a: 588 files, 36527 used, 471256 free (72 frags, 58898 blocks, 0.0% fragmentation)
Mounting local filesystems:.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/nss /usr/local/lib/perl5/5.24/mach/CORE /usr/local/llvm40/lib
Setting hostname: www.zefox.com.
Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
Feeding entropy: .
smsc0: chip 0xec00, rev. 0002
ue0: link state changed to DOWN
ue0: link state changed to UP
Starting Network: lo0 ue0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
	options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
	inet6 ::1 prefixlen 128 
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 
	inet 127.0.0.1 netmask 0xff000000 
	groups: lo 
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
ue0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=80009<RXCSUM,VLAN_MTU,LINKSTATE>
	ether b8:27:eb:1a:5a:4b
	inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255 
	media: Ethernet autoselect (100baseTX <full-duplex>)
	status: active
	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Starting devd.
uplcom0 on uhub1
uplcom0: <vendor 0x067b product 0x2303, class 0/0, rev 1.10/4.00, addr 5> on usbus0
add host 127.0.0.1: gateway lo0 fib 0: route already in table
add net default: gateway 192.168.1.254
add host ::1: gateway lo0 fib 0: route already in table
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
Creating and/or trimming log files.
Starting syslogd.
No core dumps found.
Setting date via ntp.
23 Feb 14:55:49 ntpdate[471]: step time server 144.76.197.108 offset -22931.130759 sec
lock order reversal:
 1st 0xc4446e80 bufwait (bufwait) @ /usr/src/sys/kern/vfs_bio.c:3566
 2nd 0xd72d1400 dirhash (dirhash) @ /usr/src/sys/ufs/ufs/ufs_dirhash.c:289
stack backtrace:
Clearing /tmp (X related).
Updating motd:.
Mounting late filesystems:.
Configuring vt: blanktime.
Performing sanity check on sshd configuration.
Starting sshd.
Starting sendmail.
Starting sendmail_msp_queue.
Starting cron.
Starting background file system checks in 60 seconds.

Fri Feb 23 14:55:53 PST 2018

FreeBSD/arm (www.zefox.com) (ttyu0)

login: Feb 23 14:57:09 www su: bob to root on /dev/pts/0
Feb 23 15:23:26 www sshd[22222]: error: PAM: Authentication error for root from 217.61.5.246
Feb 23 15:23:26 www sshd[22222]: error: PAM: Authentication error for root from 217.61.5.246
Feb 23 16:03:39 www sshd[22309]: error: maximum authentication attempts exceeded for root from 84.158.26.18 port 33848 ssh2 [preauth]
Feb 23 16:24:37 www sshd[22369]: error: maximum authentication attempts exceeded for invalid user service from 37.212.163.31 port 31664 ssh2 [preauth]
Feb 23 16:43:47 www sshd[22410]: error: maximum authentication attempts exceeded for root from 159.224.242.214 port 57864 ssh2 [preauth]
Feb 23 17:44:10 www sshd[22585]: error: maximum authentication attempts exceeded for invalid user support from 1.230.44.160 port 55419 ssh2 [preauth]
Feb 23 17:51:20 www sshd[22594]: error: maximum authentication attempts exceeded for invalid user admin from 116.121.68.143 port 46931 ssh2 [preauth]
Feb 23 18:26:09 www sshd[22703]: error: maximum authentication attempts exceeded for root from 77.243.183.172 port 55738 ssh2 [preauth]
Feb 23 18:31:05 www su: bob to root on /dev/pts/3
Feb 23 21:47:04 www sshd[23573]: error: maximum authentication attempts exceeded for root from 183.152.83.144 port 44349 ssh2 [preauth]
Feb 23 21:57:29 www sshd[23610]: error: maximum authentication attempts exceeded for invalid user admin from 128.72.26.161 port 1045 ssh2 [preauth]
Feb 23 22:11:23 www sshd[23669]: error: maximum authentication attempts exceeded for root from 103.210.135.136 port 57964 ssh2 [preauth]
Feb 23 23:14:18 www sshd[23815]: error: maximum authentication attempts exceeded for root from 196.28.249.22 port 54304 ssh2 [preauth]
Feb 24 00:53:14 www sshd[24063]: error: PAM: Authentication error for root from 181.214.87.222
Feb 24 01:32:12 www sshd[24179]: error: maximum authentication attempts exceeded for invalid user admin from 219.157.181.230 port 45931 ssh2 [preauth]
Feb 24 01:51:21 www sshd[24232]: error: maximum authentication attempts exceeded for invalid user admin from 183.136.188.116 port 53640 ssh2 [preauth]
Feb 24 01:52:13 www sshd[24237]: error: maximum authentication attempts exceeded for invalid user admin from 182.244.182.129 port 59637 ssh2 [preauth]
Feb 24 03:07:37 www sshd[24618]: error: maximum authentication attempts exceeded for root from 119.62.34.241 port 49935 ssh2 [preauth]
smsc0: warning: failed to create new mbuf
smsc0: warning: failed to create new mbuf
smsc0: warning: failed to create new mbuf
smsc0: warning: failed to create new mbuf
smsc0: warning: failed to create new mbuf
smsc0: warning: failed to create new mbuf
smsc0: warning: failed to create new mbuf
smsc0: warning: failed to create new mbuf
smsc0: warning: failed to create new mbuf
smsc0: warning: failed to create new mbuf
smsc0: warning: failed to create new mbuf
smsc0: warning: failed to create new mbuf
smsc0: warning: failed to create new mbuf
smsc0: warning: failed to create new mbuf
smsc0: warning: failed to create new mbuf
smsc0: warning: failed to create new mbuf
smsc0: warning: failed to create new mbuf
smsc0: warning: failed to create new mbuf
smsc0: warning: failed to create new mbuf
smsc0: warning: failed to create new mbuf
smsc0: warning: failed to create new mbuf
smsc0: warning: failed to create new mbuf
smsc0: warning: failed to create new mbuf
smsc0: warning: failed to create new mbuf
smsc0: warning: failed to create new mbuf
smsc0: warning: failed to create new mbuf
smsc0: warning: failed to create new mbuf
smsc0: warning: failed to create new mbuf
smsc0: warning: failed to create new mbuf
smsc0: warning: failed to create new mbuf
smsc0: warning: failed to create new mbuf
smsc0: warning: failed to create new mbuf
smsc0: warning: failed to create new mbuf